BerryGPS setup Guide for Raspberry Pi

BerryGPS-IMU v2 Plate has been designed to fit perfectly with the Raspberry Pi Zero. It is also compatible with all other versions Raspberry Pi, including the Pi 3B+.
BerryGPS-IMU v2 uses the M20048 from Antenova, which is a high quality GPS module which is able to track 22 satellites. The BerryGPS-IMU v2 is a GPS module which also includes the sensors that can be found on the BerryIMU v2 Plate.

BerryGPS-IMU v2 is also fitted with a barometric sensor (BMP280) which can be used to calculate altitude. A temperature sensor is also included.

Read More

Streaming Video with the Raspberry Pi Zero W & Pi Camera

I needed a really tiny yet cheap camera so I thought of the Raspberry Pi Camera module. The Version 2 Camera Module does 8MP with good quality, although a 5MP  IR-Cut Camera better suited my needs.

About the IR-CUT Camera

The IR-CUT Camera works on Normal Mode by default. There are two ways to toggle between Normal Mode and Night-vision Mode.

1. By editing the config.txt file:

sudo nano /boot/config.txt

and append:

disable_camera_led=1

exit with save and restart your Pi then the camera will work on Night-vision Mode.Read More

Raspberry Pi “Zero”: HDMI Monitors Has NO SIGNAL

When connecting a Raspberry Pi ‘Zero’ for the first time to a TV monitor with HDMI, and receive the message: “No Signal”. I tried it on several inputs and cables with no luck. Other devices work fine with the TV, and the cables so there can not be the problem. Then I tried a computer monitor with HDMI, also with no luck. What is happening?

I’ve investigated the problem for a couple of hours, before finding the solution.

The Raspberry Pi ‘Zero’ outputs a relatively weak HDMI Signal. Some devices may not immediately notice the Raspberry Pi ‘Zero’s HDMI Signal, or may not go through the negotiation process.Read More

Setup Raspberry Pi Zero with Headless WiFi

The following instructions will work anytime, you don’t necessarily have to follow them for the first boot – this is just a very convenient way to get your Raspberry Pi onto a network without using any plug-in peripherals like a keyboard, mouse or monitor.

What is “headless,” anyway?

A computer setup without a monitor is said to be running headless. You might want to do this if you’re installing your Pi into some project, or want to keep power-usage and cost minimal. This kind of setup is what the Pi Zero W was built for. The idea is that you can still access your Pi’s terminal interface over your network using a protocol called SSH.

All we need to do is get our Pi set up with the right WiFi credentials and we’ll be able to remotely access it through a terminal program, as if we were using the terminal Pi’s own desktop. What’s more, we’ll get our Pi connected to WiFi without ever having to plug in a monitor, keyboard or mouse to configure it.Read More

Timelapse Photography with Raspberry Pi Zero

This tutorial will guide you through taking photos using a Pi Zero and camera, to make a simple timelapse-capturing device. Use it to make a timelapse of a plant growing with the delay set to a day, or the progress on your building work with hourly photos, or a soldering project with a photo every 5 seconds.

Enable the camera

This tutorial assumes you have already set up your OctoCam as per the instructions. If you’re using a camera and a Pi, make sure the camera is connected.

In the Terminal, type sudo raspi-config and press Enter. This will bring up a menu on the screen. You’ll need to press 5, then choose option 1 to enable the camera, and then choose yes. Once you finish with the menu you should get prompted to reboot. This needs doing!Read More

Do NOT follow this link or you will be banned from the site!